This was a sign removal for Good Night Inn in Los Angeles. The sign cabinet was 14'h x 10'w. The first thing we had to do was to cut the electrical power from the sign in order to remove it. We used a 40ft bucket truck to remove the signs. There was two identical signs on the motel. For more information on Sign Removal Los Angeles.
Once we cut the power off, then we proceeded to take off the panaflex face off the sign cabinet. This material is very light weight and has the appearance of fabric. This material is used as a translucent substrate for sign cabinets that are over sized. This makes the installation or removal of the sign much easier. We took a knife and started to cut the panaflex material from the sign cabinet. Then, we removed the fluorescent lamps and the 2-ballasts(electrical transformers to power up the sign cabinet). Finally, we started to loosen up the bolts that were holding up the sign on the building. Once, the bolts were completely removed, the sign was hanging on the arm of the bucket truck, so we could now bring it down to the floor. You can a look at our Los Angeles Sign Removal.
It took over 8 hours to remove these two signs. We had to dismantle the sign cabinets in order to reduce the size of the cabinets, so we could transport them to the Los Angeles public dump for disposal of the signs.
We can assist- Los Angeles Signs & Awnings, any company to remove their sign, call now for a free estimate: 818-861-5394.
No comments:
Post a Comment